Emergency 7/7 ✦ Patio awnings ✦ Roller shutters ✦ Metal shutters ✦ Roller garage doors ✦ Automation ✦ Maintenance ✦ Free quote ✦ Paris & Île-de-France ✦ All brands ✦ 

Metal shutter installation in Paris and Île-de-France: manual or electric, made to measure

Wide shopfronts, daily openings, comfort and security: the electric metal shutter has become the standard for modern retail premises. Store Xpress sizes it, manufactures it and installs it turnkey across Paris and the whole Île-de-France region.

The electric shutter, standard of the modern shopfront

Turn a key or press a button, and watch your shopfront open in about twenty seconds: that is what a properly installed electric metal shutter delivers. As soon as the opening exceeds three to four metres in width, the curtain is made of heavy solid slats, or you operate it several times a day, motorisation stops being a luxury and becomes the obvious choice: it spares your team's backs, speeds up opening and closing routines, and makes possible large curtains that no one could handle by hand.

Store Xpress installs new electric shutters for every retail format: convenience stores and organic grocers, car dealerships and garages, town-centre pharmacies, brasseries, estate agencies, warehouses and business units — including the Paris branches of international chains, with documentation and follow-up in English if you prefer. Every project starts with a free technical survey on site — dimensions of the opening, available power supply, winding direction, building or co-ownership constraints — followed by a firm, itemised quote.

Central motor or tubular motor: which drive?

The central motor

Mounted at the middle of the winding shaft, the central motor is the historic workhorse of shopfront shutters. Powerful, durable and repairable, it drives heavy solid-steel curtains without strain, up to very large widths. It works together with compensation springs, which reduce the load on the motor and make manual override easy. It is our recommendation for shops with a high frequency of use and for curtains over 100 kg.

The tubular motor

Housed inside the winding tube itself, the tubular motor is more discreet and more economical. It is a natural fit for lighter curtains, rolling grilles and medium-sized openings. Its compactness lets it slip into shallow housings — a real advantage on Parisian shopfronts where every centimetre of lintel counts. We select the motor torque (from 60 to over 300 Nm) according to the exact weight of the curtain, with a safety margin that protects its working life.

Controls and safety devices

Free survey for your electric shutter

A technician visits, measures your opening and prices your project within 24 hours.

An installation done properly

Installing an electric shutter calls on both metalwork and electrical skills. Our teams fix the motorised shaft on brackets sized for the curtain's weight, mount the side guides plumb to the millimetre, wire the motor to a dedicated, breaker-protected circuit, set the upper and lower limit switches, arm the safety brake and test the manual override. Handover is done with you present: full cycles, timing of the travel, test of the key switch and delivery of the programmed remote controls. You leave with a complete technical file — manual, wiring diagram, certificate of conformity — valuable for your insurer and for the annual maintenance your premises are required to keep up.

If your premises already have a manual shutter in good condition, there is no need to replace everything: our shutter automation service adds a motor to your current shaft. Conversely, for a very small opening with no power supply, a spring-assisted manual shutter is sometimes still the most rational choice — and we will tell you so honestly at the survey.

Indicative prices for an electric metal shutter, fitted

Ranges observed on our recent projects across the Greater Paris region, supplied and fitted:

These figures include the safety brake, the key switch, limit-switch adjustment and removal of the old closure where applicable. A well-maintained electric shutter runs for fifteen years and more; and if it ever fails on an opening morning, our 24/7 emergency service is on the line at 07 66 54 96 41.

We install electric shutters across Île-de-France

From the Haussmann shopfronts of the Grands Boulevards in Paris to the retail parks of the outskirts, our fitters work in Neuilly-sur-Seine, Rueil-Malmaison, Saint-Maur-des-Fossés, Noisy-le-Grand, Drancy and Colombes, as well as Chelles, Poissy, Savigny-sur-Orge and Franconville. Chains and franchises with several stores in Île-de-France benefit from coordinated scheduling: night-time or pre-opening installation so that no store ever has to close during trading hours.

Why choose a manual metal shutter?

Not every shopfront needs a motor. On a narrow opening — a newspaper kiosk, a covered-market stall, a small town-centre boutique, a stockroom or a back-of-house doorway — a manual metal shutter has some decisive advantages: no electrical connection to plan, no motor to break down, a lower purchase price and a remarkable working life when the mechanism is properly set up. It is also the perfect answer for premises with no power supply on the façade, a common situation in Paris's covered passages and in the market halls of the Greater Paris region.

Store Xpress designs every manual closure to measure after a precise site survey, then handles the complete installation: removal of the old equipment where needed, fixing of the side guides and roller shaft, fine adjustment of the spring balance and handover of the keys. We work on new fit-outs and replacements alike — in Paris, Montreuil, Asnières-sur-Seine, Corbeil-Essonnes or Rambouillet — and are just as comfortable dealing with an independent shopkeeper as with the fit-out contractor of an international brand.

Direct pull or spring-assisted: two mechanisms

The direct-pull shutter

This is the most stripped-down version: the curtain winds around a free-running shaft and is moved by hand, with a pull strap or a pole. With no spring or winch, there is almost nothing that can fail. The system suits low, narrow openings — in practice up to about 1.80 m with a light curtain — such as serving hatches, takeaway counters and service windows.

The spring-assisted manual shutter

As soon as the curtain grows, its weight becomes impossible to lift unaided. The spring-assisted shutter houses calibrated torsion springs inside the winding shaft that counterbalance the weight of the slats: the shopkeeper simply guides the movement and the mechanism does the rest. Properly balanced, a curtain of 8 to 10 m² can be operated with one hand. It is the standard for shopfronts up to roughly 3 metres wide; beyond that, or if you open and close several times a day, we will steer you towards an electric shutter installation instead.

Slats, dimensions and finishes

Fixing and locking: the details that make the difference

The strength of a manual closure owes as much to its installation as to its curtain. Our technicians match the fixing method to the wall behind it: chemical anchors in the dressed stone or old brick of Parisian buildings, bolted plates on concrete, reinforcement on lightweight structures. The side guides are sized with enough overlap to resist being prised out, and the shaft is mounted on end plates built to take years of daily cycles.

On the locking side, several levels of security are available: key-operated side bolts passing through the guides, a central lock recessed into the bottom slat with a European cylinder, or a combination of the two for higher-risk trades. We can also fit ground anchor rings for high-security padlocks and match key sets if you run several closures. After installation, every shutter is tested through full cycles and the spring balance is finely adjusted: a curtain that is hard to lift, or that creeps up on its own, is a curtain that has been badly set up.

Indicative prices for a manual metal shutter, fitted

The budget depends on the dimensions, the slat type and the level of locking. As a guide, supplied and fitted in Île-de-France:

These ranges include removal of the old closure where necessary. The quote issued after our technical visit is firm and itemised, line by line. And if your business grows, remember that a well-installed spring-assisted shutter can later be fitted with a motor without replacing the curtain — one more reason to get the initial installation right. Finally, think about an annual service: lubrication and spring checks will keep the shutter running smoothly for fifteen to twenty years.

Our installation method, step by step

Step one, the free technical visit: laser measurement of the opening, examination of the lintel and reveals, choice of winding direction (inside or outside) and locking options. Step two, made-to-measure manufacture of the curtain and shaft, taking one to two weeks depending on the finish. Step three, installation in half a day to a full day: fixing the brackets, mounting the shaft and springs, clipping the slats, fitting the side guides, adjusting the tension and testing. We leave the site clean and take the old equipment away. This organisation lets us equip a boutique in the Marais just as neatly as a workshop unit in Créteil, Trappes or Villepinte, with the same standard of finish.

Frequently asked questions about electric metal shutters

What happens during a power cut?

All our electric shutters are fitted with a manual override, by crank handle or pull cord depending on the motor. You can therefore always open or close your shop, even without electricity.

Is the safety brake really compulsory?

Yes. On an electric shutter, an anti-fall device is required to stop the curtain crashing down if the shaft or motor fails. We fit it as standard and test it at every maintenance visit.

Central or tubular motor: which should I choose?

The central motor is the right answer for heavy curtains and intensive use; the tubular motor, more compact and economical, suits grilles and medium openings. Our technical survey settles the question from the exact curtain weight and the space available in the housing.

How long from quote to installation?

Allow two to three weeks for made-to-measure manufacture of the curtain and motorised shaft, then one day on site. If your shopfront is unsecured in the meantime, we fit a temporary closure.

Can the shutter open automatically on a timer?

Yes, with a programmable timer or a connected receiver: your shutter opens at a set time each morning and closes in the evening, with manual control always taking priority.

What is the maximum size for a manual metal shutter?

With well-balanced spring assistance, you generally stay under 4 m wide and 3 m high — around 10 to 12 m² of curtain. Beyond that, the weight makes manual operation a chore and an electric motor becomes the sensible option.

How long does the installation take?

Half a day for a straightforward opening, a full day if we have to remove an old closure or make good the wall. Made-to-measure manufacture takes one to two weeks beforehand.

Is a manual shutter less secure than an electric one?

No: resistance to forced entry depends on the curtain, the side guides and the locks, not on how the shutter is operated. A manual shutter with solid slats, a central lock and side bolts protects a small shopfront very effectively.

Can my manual shutter be motorised later?

Yes, in most cases. If the shaft and curtain are in good condition, we add a central motor to the existing shaft with a key switch or remote control, without replacing the whole closure.

Our other services

📞