The electric roller shutter: far more than a gadget
Opening ten shutters every morning and closing them every evening adds up to hundreds of movements a month. The electric roller shutter removes that chore at the touch of a button — and it does much more besides. Programmed to a schedule, your shutters simulate a lived-in home while you are away on holiday or on business. Paired with a dusk sensor, they lower themselves as night falls and keep the warmth in through the winter. Linked to a temperature sensor, they close during the hottest hours of a Paris summer and keep the flat cool without air conditioning — a serious asset in buildings that were never designed for heatwaves.
It is also a question of accessibility: for older residents or anyone with reduced mobility, motorisation turns an awkward, sometimes impossible movement into the press of a button. And on the security front, a curtain locked by its own motor resists forced lifting far better than a free-hanging one. Store Xpress installs new electric shutters across the Greater Paris region — in apartments, houses and business premises — with neat, fully compliant wiring.
Wired, radio or solar: three motorisation technologies
The wired motor
Controlled from a wall-mounted switch, the wired motor is the most economical and most durable option. It does require a cable run between the box and the switch, which is best planned during renovation works or in a new build. With so little electronics involved, it is also the technology that ages best.
The radio motor
Here the command travels by radio: a wireless wall transmitter, a portable multi-channel remote, or a home-automation hub. No channels cut into the walls, a fast installation even in an occupied flat, and advanced functions: group control of all your shutters, a favourite position, feedback on whether each shutter is open or closed. It is the configuration we install most often in Paris and the Hauts-de-Seine, and the usual choice for expats renovating without major works.
The solar motor
A small photovoltaic panel and an integrated battery power the motor in complete autonomy: zero cables, zero consumption, guaranteed operation even during a power cut. Ideal for upper floors with no power supply nearby, outbuildings, or any project where you would rather not touch the walls or the fuse board. The battery stores enough energy for several weeks of use, even under an overcast Île-de-France sky.
Fancy shutters that open themselves?
Free personalised survey and a detailed quote within 24 hours, anywhere in Île-de-France.
Smart-home control and programming: shutters with a brain
- Programmable timer: automatic opening and closing at set times, or tracking sunrise and sunset through the year.
- Presence simulation: slightly randomised schedules while you are away, to discourage anyone watching the building.
- Smartphone control: remote operation, "leaving home" and "coming home" scenes, live status of every shutter via TaHoma, io-homecontrol or Zigbee depending on the ecosystem you choose.
- Voice assistants: compatibility with Google Home, Alexa and Apple Home, so the shutters answer in whichever language you speak at home.
- Built-in safety: obstacle detection that stops the curtain, frost protection that avoids straining a shutter frozen to its rails, reinforced locking in the closed position.
At commissioning, we set the limit positions to the millimetre, create your room-by-room control groups and walk you through the app — you are left with an installation that is fully operational, and instructions you actually understand.
Our installation service, from survey to handover
Everything starts with a free technical visit: measurements, a check of the available power supply, and the choice of curtain material (insulated aluminium recommended on wide spans) and control technology. We then manufacture to measure and schedule the installation: fixing the box and guide rails, electrical connection by a certified technician, radio programming and full testing. A motorised French door is fitted in half a day; a whole house is typically equipped in one to two days, in Issy-les-Moulineaux as in Chelles or Corbeil-Essonnes.
Already have manual shutters in good condition? There is no need to replace them: our roller shutter motorisation service electrifies your existing equipment at a fraction of the cost. And if budget matters more than comfort, compare with a manual roller shutter installation — we systematically present both prices so you can decide with full visibility.
Indicative prices for an electric roller shutter, fitted
- Standard window, wired motor: €450 to €700, supply and installation.
- Standard window, radio motor: €550 to €850 with a wireless control point.
- French door or glazed bay: €700 to €1,300 depending on width and curtain.
- Self-contained solar version: €150 to €300 extra per shutter.
- Home-automation hub and scenes: from €250 to control the whole home.
Every project gets a free, line-by-line quote with no obligation — in English on request.
Why choose a manual roller shutter in 2026?
In an age when everything is connected, the manual roller shutter still holds arguments that motorisation cannot match. The first is price: for the same dimensions, a strap-operated model costs 30 to 50% less than an electric one, installation included. The second is reliability: with no motor, no electronics and no remote control, the possible points of failure can be counted on one hand — and every wearing part can be replaced for a few tens of euros.
The third advantage often clinches it for tenants, landlords and second-home owners: no electrical connection is needed. No channels cut into the wall, no electrician to coordinate, no power cut that leaves your windows unusable. A manual shutter works in all weathers, in all circumstances, for decades. It is the sensible choice for standard-sized windows, studio flats, cellars and utility rooms, bathrooms and toilets — or for any home where you want to keep the budget firmly under control. If you rent out property in Paris, it is also the option with the lowest maintenance overhead between tenancies.
Strap, crank handle or direct pull: which operation to choose?
Strap operation
A classic of Parisian apartments, the strap passes through the wall or the box and winds onto a small reel inside. It offers quick, intuitive handling, ideal for windows up to about 1.60 m wide. We fit swivelling reels and reinforced straps that resist wear far better than the originals.
Crank handle operation
The crank winch multiplies your effort: it lets you operate wider or heavier curtains without straining, up to French doors and small glazed bays. It is also the most discreet operation from inside, with a simple universal joint emerging below the box. We set the exit angle of the joint so the movement stays natural, even behind a curtain or a piece of furniture.
Direct pull
On very small openings — dormers, oeil-de-boeuf windows, cellar windows — a curtain fitted with compensation springs is simply pushed up and pulled down by hand, with no intermediate mechanism at all. It is the most stripped-back solution, and therefore the most durable, provided the opening stays within easy reach.
Materials and finishes available
- PVC curtain: the best value for standard dimensions, with good insulation and upkeep limited to a simple wash.
- Double-walled aluminium curtain: slats filled with polyurethane foam, more rigid and slimmer, recommended once the width exceeds 1.80 m or when break-in resistance matters.
- Box mounted on the façade or under the lintel: aluminium or PVC, angled or rounded profile, matched to the colour of your window frames.
- Matching guide rails: white, anthracite grey, beige, brown or any RAL colour, to respect the harmony of the façade — a point Parisian co-ownership rules frequently insist on.
- Locks and stops: curtain stoppers, with optional automatic anti-lift locks for ground-floor windows.
Renovation or new build: how we work
In renovation — the most common case in Paris, Asnières-sur-Seine or Maisons-Alfort — the complete shutter (box, guide rails, curtain) is fixed onto the existing window frame or the masonry, with no heavy building work. Measuring is everything: we take the dimensions of each opening at three points, check that the reveals are plumb and confirm the depth available for the box before the made-to-measure unit goes into production.
In a new build or extension, we install lintel-integrated boxes or complete window-and-shutter units that are invisible from the street. On installation day, our technicians protect the room, fix the guide rails perfectly parallel, drill the strap or crank passage with an insulating sleeve to avoid any thermal bridge, then adjust the tension and the end stops. Fitting a manual shutter generally takes half a day per opening, removal and disposal of the old shutter included. And if you change your mind later, a roller shutter motorisation remains possible: on request we fit motor-ready roller tubes from the start.
Indicative prices for a manual roller shutter, fitted
- Standard window (up to 1.20 m): €250 to €400 in PVC, €350 to €550 in aluminium.
- Large window or French door: €400 to €700 depending on material and operation.
- Crank handle operation: €40 to €80 more than strap operation.
- Removal and disposal of the old shutter: included in our replacement packages.
These figures cover supply and installation, to be refined against your exact measurements in the free quote. To compare calmly with an electric version, see our page on electric roller shutter installation — we always present both options side by side.
Where we work
Our teams install electric roller shutters in Paris and throughout Île-de-France: Issy-les-Moulineaux, Sartrouville, Chelles, Corbeil-Essonnes, Bobigny, Nogent-sur-Marne, Pontoise and all the neighbouring towns. If a motor or remote fails on an existing installation, our emergency roller shutter team is out 7 days a week; and to keep your motors in top condition, look at our roller shutter maintenance plans.
Recent roller shutter installations



Frequently asked questions about electric roller shutters
What happens during a power cut?
Solar motors carry on running from their battery. For wired and radio motors, a manual override (release crank) can be fitted on key openings, and some motors come with an integrated back-up battery.
Are electric shutters noisy?
Modern tubular motors are very discreet — around 40 to 50 dB in operation, quieter than a conversation. Soft-start versions, quieter still, are available for bedrooms.
How long does a roller shutter motor last?
A quality motor handles 10 to 15 years of daily cycles, often more with regular servicing. If it fails, the motor is replaced on its own, without changing the curtain or the box.
Can an electric shutter be installed without major works in an occupied flat?
Yes: radio and solar technologies need no wall channels and no cabling. Installation takes a few hours, with no damage to walls or decoration — an important point in rented flats and older Parisian buildings.
Do electric roller shutters cut heating bills?
Yes: closed automatically at nightfall, they trap an insulating layer of air in front of the glazing. ADEME, the French energy agency, estimates up to 10% off heating costs with well-managed shutters — not counting the summer comfort.
How long does a manual roller shutter last?
Properly fitted and maintained, a manual shutter works for 20 to 30 years. The only wearing parts are the strap (replaced roughly every 8 to 12 years) and the crank winch — two quick, inexpensive repairs.
Is a manual shutter less secure than an electric one?
No — not for the same curtain. Break-in resistance depends above all on the slat material and the locks. We fit manual shutters with automatic anti-lift locks that hold the curtain firmly in the closed position, exactly as on a motorised model.
Up to what width can a manual roller shutter be fitted?
With a strap, we recommend staying below about 1.60 m; with a crank handle you can go up to 2.40 m depending on the weight of the curtain. Beyond that, the effort becomes uncomfortable and motorisation is the better choice.
Can a manual shutter be converted to electric later?
Yes. If the roller tube is compatible, the winch is simply replaced by a tubular motor. Mention the idea when you request your quote: we will fit a motor-ready tube from the start, at no significant extra cost.
Do I need permission to install a manual shutter?
In a co-owned building, the syndic's approval is often required to preserve the harmony of the façade (colour, box type). For a house, some communes and protected areas require a prior declaration. We guide you through these formalities during the technical visit — including what they mean if you are not used to French procedures.